Recently, many customers have been inquiring about equipment for automatic glue dispensing on end caps of tri-proof lights/purification lights/bracket lights. Some people also refer to them as tinplate lights. During their assembly process, there are two areas where adhesive bonding may be used: one is for securing the light strip, where some manufacturers use a clip design, while others use adhesive; the other is for installing the end cap, which requires adhesives to secure the end cap and provide a certain level of waterproofing. GDS offers various solutions that can meet the requirements of automatic glue dispensing processes for tri-proof lights/purification lights/tinplate lights.

For the glue dispensing and bonding of end caps for tri-proof lights/purification lights/bracket lights/tinplate lights, GDS three-axis automatic glue dispensing machine can be used. The feasibility of its application depends on two factors: firstly, the width and depth of the groove in the end cap. If the groove is too narrow and deep, it is difficult for the dispensing nozzle to reach or enter the groove, and even if it can, the dispensing speed will be very slow. Secondly, the viscosity of the glue being used - because the groove itself is quite narrow, only extremely fine metal needles can be used, and if the glue is also very viscous, the dispensing speed will be further reduced. GDS can customize fixtures for customers to solve the problem of precise positioning during end cap dispensing, but the speed and efficiency of dispensing depend on the design of the end cap itself. At the very least, GDS three-axis automatic dispensing machine can solve problems like difficulties in manual dispensing and uneven dispensing. To further improve the efficiency of end cap dispensing, considerations should be made from the initial design stage of the end cap, such as designing the groove wider and using slightly less viscous glue.

For the light strip dispensing process of tri-proof lights/purification lights/tinplate lights, GDS floor-standing large-stroke three-axis automatic glue dispensing machine can be selected, which first meets the travel requirements of these types of lighting fixtures and then solves the problem of batch rapid dispensing. Customizable dual-dispensing heads can complete two dispensing operations simultaneously. Additionally, GDS can customize an automatic dispensing and lamp strip attachment circulating production line to achieve online automatic dispensing, automatic attachment of lamp strips, and automated jig return flow. This type of production line is more suitable for factories with large order volumes and high levels of automation requirements.

For more information about automation solutions for tri-proof lights/purification lights/bracket lights/tinplate lights, please feel free to contact and consult Zhongshan GDS Automation Equipment Co., Ltd.